Your source for information and technical support for the

Ellison Throttle Body Injector

Installation Dimensions 

Each of the Throttle Body Injector product pages has detailed dimension information.  When converting from a conventional carburetor or fuel injection system to the Ellison Throttle Body Injector there will be a difference in the spacing from engine mounting flange to the air box flange, in other words the space taken up by the Throttle Body.  The chart below provides approximate dimensions of this Flange-to-Flange distance as a reference.  Also note that throttle and mixture control cable installation will be different.  Be sure to verify the dimensions for your specific installation. 

THROTTLE BODY/ CARBURETOR

FLANGE-TO-FLANGE DIMENSION - INCHES

EFS-3A

4.06

EFS-4

4.13

EFS-4-5

4.88

 

 

MA-3

4.27

MA-4SPA

4.59

MA-4-5

6.39

HA-6

6.63

PS-5C

5.50

RSA-5

5.50

 

909-906-1472         Ellison-Fluid-Systems, Inc.

info@ellison-fluid-systems.com

909-906-1473 Fax      23052H Alicia Pkwy #395    
Site Map - ellison      Mission Viejo, Ca. 92692

Webmaster